LaserCode 200®

LaserCode 200 Sample Etchings
WHAT IS THE LASERCODE 200®?
The LaserCode 200® is a laser marking system designed to etch permanent barcodes and text on different labware types. Mark barcodes with the 1D/2D symbology of your choice including multiple lines of text and/or sequences on ceramic patched glassware, plastic labware (such as cryovials patched with a white writing block), and plates. If your labware has no writing block, TWD can apply the patch for you; please call 888-323-3585 for more details.


BENEFITS OF THE LASERCODE 200®

  • Benchtop design saves space

    •
  • Easy-to-use Software Interface
  • Marks Quickly - 8 second average per vial

    •
  • Easy 2-step operation: Load containers and enter label information

    •
  • Minimal Maintenance

LASERCODE 200® BENCHTOP FACILITY REQUIREMENTS

Single phase 110VAC 10 amp 50/60 Hz
Single phase 220VAC 5 amp 50/60 Hz
Exhaust: One 2.5" (64mm) connection requiring 150 CFM or a blower capable of 6 inches of water (255m/hr at 1.5kpa)
Cooling: Air-cooled, ambient operating range of 50° - 95°F (10°- 35°C)
Laser Working Area: 16"x12"
Dimensions: 17"h x 23"w x 24"d; 91 pounds (30kg)
Laser Power: 25 Watts